products-banner

CIRCULAR SAW BLANKS

Different materials represent different challenges as well as different solutions. Our fast cutting diamond blades are available in diameters from 110mm to 3.5 meter. The vast ranges of specified bonds along with choice of standard noise reduced steel centres provide a perfect solution for every challenge.

Our Steel Blanks are made with high strength special steel, Precisely heat treated, ground, straightened and tensioned and uniform metallurgical structure

Our Gang Saw Blades have:

  • Excellent adhesion property for brazing or laser welding
  • High fatigue resistance and good stability
  • Vibration Free Consistent performance

We Supply all type of saw Blanks including Normal Saw Blank, Multi Cutter Saw Blank, Narrow Slot Saw Blank, Wide Slot Saw Blank and Key Slot Saw Blank. A Complete Detail of our saw blanks are given in a table below:

Circular Saw Blanks for Multi Cutter : Apart from supplying Single Blank we supply steel Blanks for Multi cutter machines also. We supply 9 Blanks set and 5 Blanks set in 5.5mm Thickness.

STANDARD DIMENSIONS

Saw Diameter No. of Slots
(narrow slot)
No. of Slots
(wide slot)
Core
Thickness
(mm)
Segment
Length
(mm)
Cutting
Width
(mm)
Height of Diamond
Impregnation
(mm)
984(40″) -s 70 5.0 23 6.7/7.0 12.0/13.0/15.0
1084(44″) 70 5.5 23 7.2/7.5/8 12.0/13.0/15.0
1184(48″) 80 5.0/5.5/6.0 23 7.2/7.5/8 12.0/13.0/15.0
1240(50″) 80 5.0/5.5/6.0 23 7.2/7.5/8 12.0/13.0/15.0
1340(54″) 88 5.5/6.0 23 7.8/8.0 12.0/13.0/15.0
1584(64″) 104 6.0/6.5 23 8.0 12.0/13.0/15.0/20.0
1625(65″) 104 6.0/6.5 23 8.0 12.0/13.0/15.0/20.0
1784(72″) 120 7.0 23 9.5 12.0/13.0/15.0/20.0
1984(80″) * 128 7.5/8.0 23 10.0/10.5 12.0/13.0/15.0/20.0
2184(2.2m) 132 8.0 23 10.5 12.0/13.0/15.0/20.0
2484(2.5m) 140 9.0 23 11.0/12.0 12.0/13.0/15.0/20.0
2984(3.0m) 160 9.0 23 11.0/12.0 12.0/13.0/15.0/20.0

STANDARD DIMENSIONS

Saw Diameter No. of Slots
(narrow slot)
No. of Slots
(wide slot)
Core
Thickness
(mm)
Segment
Length
(mm)
Cutting
Width
(mm)
Height of Diamond
Impregnation
(mm)
340(14″) 24 2.3 40 3.2 8.0/10.0/12.0/15.0
390(16″) 28 2.5 40 3.5 8.0/10.0/12.0/15.0
440(18″) 32 2.8 40 4.0 8.0/10.0/12.0/15.0
490(20″) 36 30 2.8 23/40 4.0 8.0/10.0/12.0/15.0
590(24″) 42 36 3.3 23/40 5.5 8.0/10.0/12.0/15.0
626(25″) 42 36 3.3 23/40 5.8 8.0/10.0/12.0/15.0
640(26″) 42 36 3.5 23/40 6.0 8.0/10.0/12.0/15.0

STANDARD DIMENSIONS

Saw Diameter No. of Slots
(narrow slot)
No. of Slots
(wide slot)
Core
Thickness
(mm)
Segment
Length
(mm)
Cutting
Width
(mm)
Height of Diamond
Impregnation
(mm)
690 50 40 4.0 40 6.0 8.0/10.0/12.0/15.0
790 58 46 4.5 30 6.5 8.0/10.0/12.0/15.0